Sulfo-SMCC sodium

生化分析试剂 Biochemical Assay Reagents
Sulfo-SMCC sodium; 纯度: 97.24%

Sulfo-SMCC sodium 是一种常用的异双官能交联剂,是不可降解的 ADC linker,其带有N-羟基琥珀酰亚胺 (NHS) 酯和马来酰亚胺基团,分别与伯胺和巯基反应。

Sulfo-SMCC sodium

Sulfo-SMCC sodium Chemical Structure

CAS No. : 92921-24-9

规格 价格 是否有货 数量
10 mg ¥500 In-stock
50 mg ¥1300 In-stock
100 mg ¥2300 In-stock
200 mg ; 询价 ;
500 mg ; 询价 ;

* Please select Quantity before adding items.

生物活性

Sulfo-SMCC sodium is a commonly used hetero-bifunctional, noncleavable ADC crosslinker bearing N-hydroxysuccinimide (NHS) ester and maleimide groups to react with primary amines and sulfhydryl groups, respectively.

IC50 Target

Non-cleavable

;

体外研究
(In Vitro)

The crosslinker Sulfo-SMCC consists of a maleimide and an N-hydroxysuccinimide ester group to bind to sulfhydryl groups and primary amines, respectively. Sulfo-SMCC inhibits the end-to-end annealing of stabilized Microtubules (MTs). MTs are treated with 250 μM Sulfo-SMCC, and imaged after incubation for 0 h, 6 h, and 24 h. MTs treated with Sulfo-SMCC shows a constant mean length, independent of the incubation time[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

436.37

Formula

C16H17N2NaO9S

CAS 号

92921-24-9

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4deg;C, sealed storage, away from moisture and light

*In solvent : -80deg;C, 6 months; -20deg;C, 1 month (sealed storage, away from moisture and light)

溶解性数据
In Vitro:;

DMSO : 125 mg/mL (286.45 mM; Need ultrasonic)

H2O : 5 mg/mL (11.46 mM; ultrasonic and warming and heat to 60°C)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.2916 mL 11.4582 mL 22.9163 mL
5 mM 0.4583 mL 2.2916 mL 4.5833 mL
10 mM 0.2292 mL 1.1458 mL 2.2916 mL

*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂:;10% DMSO ;; 40% PEG300 ;; 5% Tween-80 ;; 45% saline

    Solubility: ≥ 2.08 mg/mL (4.77 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.77 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH₂O 中,得到澄清透明的生理盐水溶液

  • 2.

    请依序添加每种溶剂:;10% DMSO ;; 90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.08 mg/mL (4.77 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.77 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

    将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中,再用生理盐水定容至 10 mL,完全溶解,澄清透明
  • 3.

    请依序添加每种溶剂:;10% DMSO ;; 90% corn oil

    Solubility: ≥ 2.08 mg/mL (4.77 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.77 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

*以上所有助溶剂都可在 MCE 网站选购。
参考文献
  • [1]. Prabhune M, et al. Sulfo-SMCC Prevents Annealing of Taxol-Stabilized Microtubules In Vitro. PLoS One. 2016 Aug 25;11(8):e0161623.

Kinase Assay
[1]

Labeled and unlabeled porcine tubulin powders are used. Sulfo-SMCC is used. MTs are polymerized to a final concentration of 2 mg/mL in 80 mM PIPES buffer (pH 6.8) containing 10 μM taxol, 2 mM MgCl2, 0.5 mM EGTA, and 1 mM GTP. A mixture of rhodamine-labeled tubulin and unlabeled tubulin (1:5) is used in the time-dependent measurements. In these experiments, polymerized MTs are divided in 2 groups: control and Sulfo-SMCC (250 μM) treated. Both samples are imaged after diluting 1:5 and incubating for 0 h (within 45 minutes after polymerization), 6 h, and 24 h[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

参考文献
  • [1]. Prabhune M, et al. Sulfo-SMCC Prevents Annealing of Taxol-Stabilized Microtubules In Vitro. PLoS One. 2016 Aug 25;11(8):e0161623.