millipore滤芯CVDI72TPS
millipore滤芯CVDI72TPS Durapore® CVDI Cartridge Filter 20 in. 0.22 µm Code 7 Silicone millipore滤芯CVDI72TPS
millipore滤芯CVDI72TPS
Durapore® CVDI Cartridge Filter 20 in. 0.22 µm Code 7 Silicone
Description | |
---|---|
Catalogue Number | CVDI72TPS |
Trade Name |
|
Description | Durapore® CVDI Cartridge Filter 20in. 0.22µm Code 7 Silicone |
Product Information | |
---|---|
Device Configuration | Cartridge |
Maximum Differential Pressure, bar (psid) | Forward: 5.5 bar (80 psid) @ 25°C; 1.7 bar (25 psid) @ 80°C; 0.35 bar (5 psid) @ 135°C. Reverse: 3.5 bar (50 psid) @ 25°C, intermittent |
Cartridge Code | Code 7 (2-226) O-rings w/locking-tabs |
Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
Biological Information | |
---|---|
Media | Durapore® |
Sterility | Other |
Bacterial Retention | Samples of the Durapore® membrane used in this cartridge were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷CFU/cm² using ASTM®F838 methodology. |
Wettability | Hydrophilic |
Physicochemical Information | |
---|---|
Pore Size | 0.2 µm |
Air Diffusion at 23°C | ≤26.6mL/min @ 2.75bar (40psig) in water |
Bubble Point at 23°C | ≥3100mbar (45psig) air with water |
Gravimetric Extractables | The extractables level was equal to or less than 25mg per 10-inch cartridge after 24hours in water at controlled room temperature. |
Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21CFR177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food. |
Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a “non-fiber releasing” filter as defined in 21CFR210.3(b)(6). |
尺寸 | |
---|---|
墨盒公称长度 | 20 英寸(50 厘米) |
直径 | 6.9 厘米(2.7 英寸) |
过滤面积 | 1.38 平方米 |
设备尺寸 | 20 英寸 |
材料信息 | |
---|---|
化学 |
|
设备材料 |
|
密封材料 | 硅胶 (SI) |
支持材料 | 聚丙烯 |