The SPL 571 OILSENSE™ is used extensively for compressor, used oil analysis, on-engine and hydraulic fluid applications. It is ideal for installations where form factor and small sample volume are important.
Our viscosity management technology is based on a simple and reliable electromagnetic concept. Two coils move the piston back and forth magnetically at a constant force. Proprietary circuitry analyzes the piston’s two-way travel time to measure absolute viscosity.
A built-in temperature detector (RTD) senses the actual temperature in the sampling chamber. Constant in and out motion keeps samples fresh, mechanically scrubs the sampling area and provides excellent viscosity tracking.
The SPL571 OILSENSE installs neatly into a 1/2” block fitting or tee. Measurements can be made in any of 6 different 20:1 viscosity ranges between 0.5 and 500 centipoise (cP). Recommended fluid flow over the sensor is up to 1.0 ft/sec.
SPL440 High Pressure Research Viscosity Sensor SPL440 高压检测粘度探头
Our industry leading viscosity technology is based on a simple and reliable electromagnetic concept. Two coils move the piston back and forth magnetically at a constant force. Proprietary circuitry analyzes the piston’s two-way travel time to measure absolute viscosity. Built-in temperature detector (RTD) senses the actual temperature in the sampling chamber.
Fluid flows through ¼”OD, 0.086” tube for measurement. Fluid may be measured under low flow or static conditions. System measures viscosity, temperature and temperature compensated viscosity. It provides data via RS-232, RS-485 or 4-20 mA signal.
The model SPL440 installs into a high pressure pump through type system. Both ends mate to HiP HF4 fittings with a 9/16-28 thread. The SPL440 is rated for continuous operation up to 20,000 psi and is static tested to 30,000 psi.
The SPL324 is an immersion viscometer with an 18” stem that fits into a standard 1.2” opening. The viscometer may be inserted into stirred reaction vessels, small tanks or open containers.
Our technology is based on a simple and reliable electromagnetic concept. Two coils move a piston back and forth magnetically at a constant force. Proprietary circuitry analyzes the piston’s two-way travel time to measure absolute viscosity.
A deflector, positioned over the piston, directs the fluid into the measurement chamber. Constant piston motion, keeps the sample fresh and mechanically scrubs the chamber. A built-in temperature detector (RTD) senses actual temperature in the measurement chamber.
The Model SPC/L392 in-line viscometer sensor provides continuous measurement of temperature and viscosity. The sensor can be used with our VISCOpro electronics to meet any viscosity management application.
Our patented technology is based on a simple and reliable electromagnetic concept. Two coils pull a piston back and forth within a constantly refreshed sample of process fluid. Proprietary circuitry analyzes the piston’s travel time to measure absolute viscosity. A built in temperature detector (RTD) senses the actual temperature in the measurement chamber.
The sensor is designed with a four bolt stainless steel SAE Code 61 flange and is easily installed in pipelines ranging from 2” and larger in size. Custom Tees are available. The back of the sensor is fitted with a 3/4“-18 NPT fitting to accomodate electrical conduit. The sensor’s self-cleaning feature helps to make it maintenance free in many applications.
• Mates with SAE Code 61 companion flange 配合使用编号为SAE 61的匹配法兰
Correlates with ASTM D445. 符合ASTM D445标准。
Approvals/Certifications: 认证和支持 • Approved for Class 1, Div. 1, Group C & D 符合Class 1, Div. 1, Group C & D标准 • Approved for EEx d IIC T2, -20C符合EEx d IIC T2, -20C标准
The Model SPC/L372J is a flow-through viscometer that is installed in laboratory and process fluids to provide continuous temperature and viscosity tracking. Our technology is based on a simple and reliable electromagnetic concept. Two coils move a piston back and forth magnetically at a constant force. Proprietary circuitry analyzes the piston’s two-way travel time to measure absolute viscosity.
A deflector, positioned over the piston, moves fluid into the measurement chamber. This feature, coupled with the constant piston motion, keeps the sample fresh and mechanically scrubs the chamber. A built-in temperature detector (RTD) senses actual temperature in the measurement chamber.
The Model SPC/L372J viscometer installs directly into a 1/4” process line using NPT fittings on the sensor. The sensor comes with a removable jacket which can be plumbed with process material for excellent temperature tracking or a separate flow line for temperature control of sample material.
Measurements can be made in 13 different viscosity ranges within an overall span of 0.2 to 20,000 cP or the equivalent cSt. Recommended flow rate over the sensor head is 0.5 to 1.0ft/sec.
*NOTE: ALL ATEX SENSORS ARE SPL ONLY (L = hard wired, C = connector).
说明：所有ATEX探头都是SPL ,L即硬电缆，C即连接头。
Key Features: 关键特性 • Acurate and reliable 高精度和稳定性
• Rugged stainless steel design 耐用不锈钢设计
• Easily installed and serviced 安装和维护简单
• One moving part 可移动部件
• Proven technology 保护技术
• Jacketed for temperature control 外套用来进行温度控制
• Installed directly into a 1/4" line 可直接安装在1/4"管线上
Correlates with ASTM D445. 符合ASTM D445标准
Approvals/Certifications: 认证和许可 • Approved for Class 1, Div. 1, Group C & D • Approved for EEx d IIC T2, -20C • Alberta Boilers Safety Association (ABSA) CRN# 0F07232.2
The model SPC/L 322 is an in-line process viscometer that is installed in process fluids to provide continuous temperature and viscosity tracking. Our technology is based on a simple and reliable electromagnetic concept. Two coils move a piston back and forth magnetically at a constant force. Proprietary circuitry analyzes the piston’s two-way travel time to measure absolute viscosity.
A deflector, positioned over the piston, moves fluid into the measurement chamber. This feature, coupled with the constant piston motion, keeps the sample fresh and mechanically scrubs the chamber. A built-in temperature detector (RTD) senses actual temperature in the measurement chamber.
The Model SPC/L322 viscometer can be immersed directly into a blend tank or a vessel. The “Big Dipper ” sensor provides continuous, accurate measurements of mixing and blending viscosities, as well as reaction tracking.
Measurements can be made in 13 different viscosity ranges within an overall span of 0.2 to 20,000 cP or the equivalent cSt. Maximum flow rate over the sensor head is 10 ft/sec (3 m/sec).
Quick, Tool-less Disconnect for Process Applications that Require Periodic Cleaning
快速，无需工具连接，生产过程应用，要求定期清理。
The Model SPC/L311 is an in-line or tank vessel viscometer that is installed in process fluids to provide continuous temperature and viscosity tracking. Our technology is based on simple and reliable electromagnetic concept. Two coils move the piston back and forth magnetically at a constant force.
A deflector, positioned over the piston, moves fluid into the measurement chamber. This feature, coupled with the constant piston motion, keeps the sample fresh and mechanically scrubs the chamber. A built-in temperature detector (RTD) senses actual temperature in the measurement chamber.
The Model SPC/L311 has a quick connect disconnect Tri-Clover® flange. Typical systems include a tee, Tri-Clamp® and an application specific gasket.
SPC/L311有一个快速连接T型盖头法兰。 典型的系统包括一个T型管，T型夹头和一个特殊的垫圈。
Measurements can be made in 13 different 20:1 viscosity ranges within an overall span of 0.2 to 20,000 cP or the equivalent cSt. Maximum flow rate over the sensor head is 10ft/sec (3 m/sec).
